CAT3

Now with enhanced design features:
• Built-in status LED's
• Easy connect sensor leads

Solar Panels £POA

In practical terms the CAT3 Electronic rust protection system reduces the progression of new rust by at least 80% as well as stabilising existing rust by the same factor. It protects 95% of the sheet metal in the vehicle body. Most saloon cars will require a standard CAT3 Unit; however large saloons such as Jaguar or Mercedes as well as 4 x 4’s and motorhomes will require a heavy duty unit. The CAT3 normally uses the vehicle battery as a source of power; however this requires that the vehicle is used on a regular basis. The CAT3 unit will not flatten the battery as it turns off at 12.2 volts.

In circumstances when a vehicle is used irregularly or laid up supplementary power must be provided. This can be achieved using:

Battery charger
Power supply
Solar power

The CAT Electronic rust protection system can also be used on static structures such as Park home Caravans. Heavy duty units, either singly or as multiples, powered by a Watson 3a power supply will protect painted caravan chassis and extend the life of the Galvanised chassis. Ongoing trials have demonstrated the effectiveness of the CAT3 System in this application.

The CAT3 Electronic Rust protection System is not magic. It is based on good science and has been evaluated by the Highly regarded Mr.Donald Harrison, who is an eminent Physicist, a member of the Institute of Electrical Engineers and a chartered Engineer. After evaluating all the evidence he concluded that the CAT3 System was effective extending the life expectancy of exposed metal by a factor of four. Most vehicles already have an extended life due to paint protection; THE CAT3 WILL EXTEND THIS FOURFOLD.

The CAT3 System Rust Prevention was designed and invented in 1987 specifically to prevent rust in motor vehicles.

The CAT3 System has been upgraded constantly offering numerous advantages over conventional spray type rust prevention methods. Totally Western Australian owned and operated.

Here are some advantages of using the CAT SYSTEM Rust Protection:

No Harmful chemicals with electronic rust proofing
No Holes drilled in chassis or doors
No Messy sprays required with electronic rust inhibitor
No Smell or drip stained driveways
No Unsightly oversprays on panels or under the bonnet
No Further maintenance required after installation
No Unscrewing panels or removing light fittings

The CAT3 has heavy duty unit especially for 4WD’s & TRUCKS
The CAT3 is completely harmless to your family
The CAT3 is impact resistant
The CAT3 Electronic Rust Control is easy to install
The CAT3 can be transferred to your next car (with new sensors)
The CAT3 has an advanced electronic design
The CAT3 reduces static electricity effects like car-sickness and static zap
The CAT3 protects all vehicle metal - inside and out
The CAT3 Electronic Rustproofing System has been laboratory tested and proven by Donald Harrison, MIEE, CE, CBE, DFH, an eminent physicist (UK), E.T.R.S. Metallurgists, M.I. Metallurgists (Australia), C.R.I.Q. Laboratories (Canada)- 9 tests

Further information can be obtained from www.rustguardian.co.uk

Back to Shop